evan.liu dd218addce tools: add requirements-ble.txt for the (git-ignored) .venv-ble ...

The venv is a per-machine artifact and stays out of git; the bats
auto-create it on first run but only installed bleak - pyserial
(required by UART OTA) was missing on a fresh machine. Both bats now
install from requirements-ble.txt (bleak==3.0.2, pyserial==3.5).

2026-09-05 10:07:14 +08:00

..

__pycache__

修复Boot跳转后BLE失败:Boot跳转前__enable_irq( PRIMASK继承问题),APP/Boot的IRAM改从0x20004000起(低16KB为ROM/BLE保留区,踩了必HardFault);bootsetting增加start_address,Boot按地址跳转;merge_image.py生成缺省bootsetting并支持参数化;make_package改-r全量重建;mcm-ddc-ble重链接到0x01008000并出caiic_ble_full整包;HardFault加栈帧打印

2026-09-02 21:04:08 +08:00

out

V1.00.26: UART baud 115200 -> 460800

2026-09-05 10:01:23 +08:00

ble_cli_test.py

mcm-ddc-ble V1.00.16~17:实测板载硅片为256KB(0x01040000起CPU读回绕/SWD fault),Flash布局回退256KB(Boot16K/bs8K/APP_DATA8K不变,APP1 0x01008000/112K,APP2 0x01024000/112K);新增appsw命令切换运行bank(记录校验+目标镜像CRC32复算防呆);uvprojx新增APP2 target(链接0x01024000,VTOR基址宏化,版本号可被target覆盖);新增make_dual_package.bat双APP整包脚本(merge_image.py支持--app2/--with-appdata);新增信息项0x07 CUR_BANK识别当前运行bank;OTA双bank配套:出包同时产bank1/bank2两份载荷(清单带target_bank),OTA_END校验镜像向量表Reset地址落在目标bank(新状态6 bank_mismatch);flash_package.bat改用DFP pack的n32wb031keq6_2 target+smart_flash=false;appsw双bank切换与CUR_BANK已实测通过;文档同步(开发日志37~39/ble_protocol.md/AGENTS.md)

2026-09-04 15:22:53 +08:00

ble_cli.bat

tools: add requirements-ble.txt for the (git-ignored) .venv-ble

2026-09-05 10:07:14 +08:00

ble_ota_update.py

V1.00.26: UART baud 115200 -> 460800

2026-09-05 10:01:23 +08:00

ble_ota.bat

tools: add requirements-ble.txt for the (git-ignored) .venv-ble

2026-09-05 10:07:14 +08:00

ble_temp_watch.py

mcm-ddc-ble V1.00.02~08：新增CLI读写特征(...c72e0003,写命令读应答)与只读参数特征(...c72e0004,全项TLV)；修复温度开机首读垃圾值(ADC初始化预热+丢弃首转)；blelog补写回调/CCCD订阅可见日志并修正CCCD值解析；tools新增bleak测试客户端(ble_cli_test.py/ble_cli.bat/ble_temp_watch.py)；make_package.bat改指mcm-ddc-ble；merge_image.py自动取APP_FW_VERSION_NUM写入OTA清单；AGENTS.md记录固件版本递增约定；开发日志第28节

2026-09-04 08:52:44 +08:00

flash_package.bat

V1.00.25: UART OTA stream mode + RX DMA ring + SRAM cliff fix

2026-09-05 09:48:28 +08:00

flash_package.py

V1.00.25: UART OTA stream mode + RX DMA ring + SRAM cliff fix

2026-09-05 09:48:28 +08:00

make_dual_package.bat

mcm-ddc-ble V1.00.16~17:实测板载硅片为256KB(0x01040000起CPU读回绕/SWD fault),Flash布局回退256KB(Boot16K/bs8K/APP_DATA8K不变,APP1 0x01008000/112K,APP2 0x01024000/112K);新增appsw命令切换运行bank(记录校验+目标镜像CRC32复算防呆);uvprojx新增APP2 target(链接0x01024000,VTOR基址宏化,版本号可被target覆盖);新增make_dual_package.bat双APP整包脚本(merge_image.py支持--app2/--with-appdata);新增信息项0x07 CUR_BANK识别当前运行bank;OTA双bank配套:出包同时产bank1/bank2两份载荷(清单带target_bank),OTA_END校验镜像向量表Reset地址落在目标bank(新状态6 bank_mismatch);flash_package.bat改用DFP pack的n32wb031keq6_2 target+smart_flash=false;appsw双bank切换与CUR_BANK已实测通过;文档同步(开发日志37~39/ble_protocol.md/AGENTS.md)

2026-09-04 15:22:53 +08:00

make_package.bat

mcm-ddc-ble V1.00.18:发布命名整理(生产整包mothercup_ble_prod,OTA单文件发布件mothercup_ble_ota);合并OTA包头扩为52B(新增hdr_len/total_size/payload_crc,原json清单信息全部收进头部,单文件发布);merge_image.py新增--combo-name;ble_ota_update.py/ble_ota.bat PC端BLE OTA升级器(实验性:CUR_BANK选包/扇区擦除避让节流/复位检测,实机调通中);SWD单bank升级流程实测通过(bin\@基址部分烧录+bsset修记录+appsw切入);格式与升级流程写入ble_protocol.md §7供App/UART升级开发;开发日志40~41

2026-09-04 16:01:41 +08:00

merge_image.py

V1.00.25: UART OTA stream mode + RX DMA ring + SRAM cliff fix

2026-09-05 09:48:28 +08:00

requirements-ble.txt

tools: add requirements-ble.txt for the (git-ignored) .venv-ble

2026-09-05 10:07:14 +08:00

uart_cap.py

V1.00.26: UART baud 115200 -> 460800

2026-09-05 10:01:23 +08:00