evan.liu 8a7cebcf77 V1.00.26: UART baud 115200 -> 460800 ...

- firmware BSP_USART_BAUDRATE 460800 (divider error +0.03%); uartrst/
  uartinfo follow the macro
- RX DMA ring 2KB -> 3KB: at 460800 2KB only covers 44ms, less than the
  ~45ms flash-erase interrupt-off window; stack top now 0x2000BDE8
  (guard warns <1KB from the 0x2000C000 cliff, by design)
- tools: ble_ota_update.py UartTransport and uart_cap.py default baud
- Verified: stream OTA 55832B in 2.6s @23kB/s (one lost frame recovered
  by go-back-N), PASS after reboot; text CLI fine at 460800
- docs: ble_protocol.md, design spec, AGENTS.md, dev log section 48

2026-09-05 10:01:23 +08:00

..

app_profile

V1.00.20: OTA_END ack guaranteed delivery via deferred reset

2026-09-04 17:35:01 +08:00

infra

mcm-ddc-ble V1.00.14:引入cJSON v1.7.18到src/infra(分配经cJSON_InitHooks挂FreeRTOS pvPortMalloc,惰性初始化);参数接口层JSON化(appget json输出JSON对象,appset json {"led":500}入参,未知键忽略前向兼容,越界整体不生效,成功回显JSON);Flash存储层保持caiic_params_t二进制记录不动;uvprojx三target加infra组;文档同步(开发日志§34/ble_protocol.md §6.5/AGENTS.md);整包+OTA包已出到tools/out

2026-09-04 13:35:26 +08:00

app_ble_proto.c

V1.00.20: OTA_END ack guaranteed delivery via deferred reset

2026-09-04 17:35:01 +08:00

app_ble.c

mcm-ddc-ble V1.00.02~08：新增CLI读写特征(...c72e0003,写命令读应答)与只读参数特征(...c72e0004,全项TLV)；修复温度开机首读垃圾值(ADC初始化预热+丢弃首转)；blelog补写回调/CCCD订阅可见日志并修正CCCD值解析；tools新增bleak测试客户端(ble_cli_test.py/ble_cli.bat/ble_temp_watch.py)；make_package.bat改指mcm-ddc-ble；merge_image.py自动取APP_FW_VERSION_NUM写入OTA清单；AGENTS.md记录固件版本递增约定；开发日志第28节

2026-09-04 08:52:44 +08:00

app_bootset.c

mcm-ddc-ble V1.00.16~17:实测板载硅片为256KB(0x01040000起CPU读回绕/SWD fault),Flash布局回退256KB(Boot16K/bs8K/APP_DATA8K不变,APP1 0x01008000/112K,APP2 0x01024000/112K);新增appsw命令切换运行bank(记录校验+目标镜像CRC32复算防呆);uvprojx新增APP2 target(链接0x01024000,VTOR基址宏化,版本号可被target覆盖);新增make_dual_package.bat双APP整包脚本(merge_image.py支持--app2/--with-appdata);新增信息项0x07 CUR_BANK识别当前运行bank;OTA双bank配套:出包同时产bank1/bank2两份载荷(清单带target_bank),OTA_END校验镜像向量表Reset地址落在目标bank(新状态6 bank_mismatch);flash_package.bat改用DFP pack的n32wb031keq6_2 target+smart_flash=false;appsw双bank切换与CUR_BANK已实测通过;文档同步(开发日志37~39/ble_protocol.md/AGENTS.md)

2026-09-04 15:22:53 +08:00

app_cli.c

V1.00.21: UART OTA channel verified + mode-switch handshake + loss-tolerant lockstep

2026-09-04 20:19:00 +08:00

app_gpio.c

推送相关文件到服务器

2026-09-02 07:53:48 +08:00

app_info.c

mcm-ddc-ble V1.00.16~17:实测板载硅片为256KB(0x01040000起CPU读回绕/SWD fault),Flash布局回退256KB(Boot16K/bs8K/APP_DATA8K不变,APP1 0x01008000/112K,APP2 0x01024000/112K);新增appsw命令切换运行bank(记录校验+目标镜像CRC32复算防呆);uvprojx新增APP2 target(链接0x01024000,VTOR基址宏化,版本号可被target覆盖);新增make_dual_package.bat双APP整包脚本(merge_image.py支持--app2/--with-appdata);新增信息项0x07 CUR_BANK识别当前运行bank;OTA双bank配套:出包同时产bank1/bank2两份载荷(清单带target_bank),OTA_END校验镜像向量表Reset地址落在目标bank(新状态6 bank_mismatch);flash_package.bat改用DFP pack的n32wb031keq6_2 target+smart_flash=false;appsw双bank切换与CUR_BANK已实测通过;文档同步(开发日志37~39/ble_protocol.md/AGENTS.md)

2026-09-04 15:22:53 +08:00

app_ota.c

V1.00.25: UART OTA stream mode + RX DMA ring + SRAM cliff fix

2026-09-05 09:48:28 +08:00

app_params.c

mcm-ddc-ble V1.00.14:引入cJSON v1.7.18到src/infra(分配经cJSON_InitHooks挂FreeRTOS pvPortMalloc,惰性初始化);参数接口层JSON化(appget json输出JSON对象,appset json {"led":500}入参,未知键忽略前向兼容,越界整体不生效,成功回显JSON);Flash存储层保持caiic_params_t二进制记录不动;uvprojx三target加infra组;文档同步(开发日志§34/ble_protocol.md §6.5/AGENTS.md);整包+OTA包已出到tools/out

2026-09-04 13:35:26 +08:00

app_usart.c

推送相关文件到服务器

2026-09-02 07:53:48 +08:00

ble_up.c

实现ble_protocol.md帧协议(CLI-over-BLE,rdtss承载);协议文档补rdtss服务UUID表与线上字节示例;开发日志第22节(mcm-ddc-ble工程全程:创建/FreeRTOS/CLI搬迁/帧协议)

2026-09-02 22:00:48 +08:00

bsp_usart.c

V1.00.26: UART baud 115200 -> 460800

2026-09-05 10:01:23 +08:00

cli_core.c

V1.00.26: UART baud 115200 -> 460800

2026-09-05 10:01:23 +08:00

main.c

V1.00.20: OTA_END ack guaranteed delivery via deferred reset

2026-09-04 17:35:01 +08:00

n32wb03x_it.c

mcm-ddc-ble并入mcm-ddc-04的CLI框架+UART驱动:bsp_usart/cli_core/app_cli移植,新增ble_up(BLE notify上行,ke_msg上下文约束);拆除app_usart透传与ns_log_lpuart(fputc冲突);rdtss下行接CLI输入;Keil跨target同名组合并坑,三个target同步清理;出caiic_ble_full整包

2026-09-02 21:33:09 +08:00