dispset 增加 all 一键全管脚设置 (APP V1.00.34)

- dispset all 0/1/z: 一次把数码管 7 个管脚全部拉高/拉低/置高阻
- 抽出 cli_disp_set_pin() 单脚驱动, 单脚与 all 共用
- 仅 APP 改动, Boot 不动 (仍 V1.00.07)
- docs/开发日志.md: 新增 §62

docs/开发日志.md

@@ -1548,3 +1548,15 @@ APP2 链接的镜像发向 APP1 区。设备端 END 校验（向量表 Reset PC
     - `cli_parse_disp_pin()`：解析 `pin1`~`pin7`（或裸 `1`~`7`）。
 - 版本：APP `V1.00.32` → `V1.00.33`（`APP_FW_VERSION_NUM` 0x00010020 →
   0x00010021）。Boot 不动（仍 V1.00.07）。
+
+## 62. `dispset` 增加 `all` 一键全管脚设置（2026-09-06，APP V1.00.34，仅 APP）
+
+- 需求：`dispset all 0/1` 一次把数码管 7 个管脚全部拉高/拉低（也支持
+  `dispset all z` 全置高阻）。
+- 实现（`mcm-ddc-ble/src/cli_core.c`）：
+  - 抽出 `cli_disp_set_pin(pin_no, val)`（单脚驱动 0/1/z），单脚与 all 共用；
+  - `CmdDispSet` 顶部识别 `all`（大小写不敏感）→ 循环 pin1~7 逐个
+    `cli_disp_set_pin()`，回显 `all 7 display pins = 0/1/high-Z`；
+  - help 串更新为 `dispset <pin1-7|all> [0|1|z]`。
+- 版本：APP `V1.00.33` → `V1.00.34`（`APP_FW_VERSION_NUM` 0x00010021 →
+  0x00010022）。Boot 不动（仍 V1.00.07）。

mcm-ddc-ble/inc/app_version.h

@@ -9,12 +9,12 @@
 #define __APP_VERSION_H__
 
 #ifndef APP_FW_VERSION
-#define APP_FW_VERSION      "V1.00.33"
+#define APP_FW_VERSION      "V1.00.34"
 #endif
 
 /* Numeric form used by the BLE info query / OTA records: 0x00MMmmpp */
 #ifndef APP_FW_VERSION_NUM
-#define APP_FW_VERSION_NUM  0x00010021u
+#define APP_FW_VERSION_NUM  0x00010022u
 #endif
 
 #endif /* __APP_VERSION_H__ */

mcm-ddc-ble/src/cli_core.c

@@ -701,77 +701,130 @@ static void CmdDispAuto(int argc, char* argv[])
 }
 
 /**
- * @brief  "dispset <pin1-7> [0|1]": drive a display pin low/high manually.
+ * @brief  Drive one display pin (1..7) to 0 / 1 / high-Z.
- *         pin1..pin7 map to PB0/PB1/PA0/PA1/PB11/PB13/PA6. "z" = high-Z.
+ * @return 1 on success, 0 on bad value, -1 on bad pin number.
- *         No value reads the current level. Use after "dispauto off".
  */
-static void CmdDispSet(int argc, char* argv[])
+static int cli_disp_set_pin(uint8_t pin_no, char val)
 {
     GPIO_Module* port;
     uint16_t     pin;
-    uint8_t      pin_no;
     GPIO_InitType s;
-    char         name[8];
 
+    if (!display_pin_map(pin_no, &port, &pin))
+    {
+        return -1;
+    }
+
+    GPIO_InitStruct(&s);
+    s.Pin = pin;
+    if (val == '1')
+    {
+        s.GPIO_Mode = GPIO_MODE_OUTPUT_PP;
+        GPIO_InitPeripheral(port, &s);
+        GPIO_SetBits(port, pin);
+    }
+    else if (val == '0')
+    {
+        s.GPIO_Mode = GPIO_MODE_OUTPUT_PP;
+        GPIO_InitPeripheral(port, &s);
+        GPIO_ResetBits(port, pin);
+    }
+    else if (val == 'z' || val == 'Z')
+    {
+        s.GPIO_Mode = GPIO_MODE_INPUT;
+        s.GPIO_Pull = GPIO_NO_PULL;
+        GPIO_InitPeripheral(port, &s);
+    }
+    else
+    {
+        return 0;
+    }
+    return 1;
+}
+
+/**
+ * @brief  "dispset <pin1-7|all> [0|1|z]": drive display pin(s) manually.
+ *         pin1..pin7 map to PB0/PB1/PA0/PA1/PB11/PB13/PA6; "all" hits all 7.
+ *         "z" = high-Z. No value reads one pin's level. Use after "dispauto off".
+ */
+static void CmdDispSet(int argc, char* argv[])
+{
     if (argc < 2)
     {
-        cli_write("usage: dispset <pin1-7> [0|1]   (e.g. dispset pin1 1)\r\n");
+        cli_write("usage: dispset <pin1-7|all> [0|1|z]\r\n");
         return;
     }
 
-    if (!cli_parse_disp_pin(argv[1], &pin_no) ||
+    /* "all": apply the value to all 7 display pins */
-        !display_pin_map(pin_no, &port, &pin))
+    if (strcmp(argv[1], "all") == 0 || strcmp(argv[1], "ALL") == 0)
     {
-        cli_printf("bad pin: %s (use pin1..pin7)\r\n", argv[1]);
+        uint8_t p;
-        return;
-    }
-    cli_pin_str(port, pin, name);
 
-    if (argc >= 3)
+        if (argc < 3 || argv[2][1] != '\0')
-    {
+        {
+            cli_write("usage: dispset all [0|1|z]\r\n");
+            return;
+        }
         if (display_auto_get())
         {
             cli_write("warning: auto display is ON - use 'dispauto off' first\r\n");
         }
+        for (p = 1u; p <= 7u; p++)
+        {
+            if (cli_disp_set_pin(p, argv[2][0]) != 1)
+            {
+                cli_write("usage: dispset all [0|1|z]\r\n");
+                return;
+            }
+        }
+        cli_printf("all 7 display pins = %s\r\n",
+                   (argv[2][0] == 'z' || argv[2][0] == 'Z') ? "high-Z" : argv[2]);
+        return;
+    }
 
-        if (argv[2][0] == '1' && argv[2][1] == '\0')
+    /* single pin */
+    {
+        GPIO_Module* port;
+        uint16_t     pin;
+        uint8_t      pin_no;
+        char         name[8];
+
+        if (!cli_parse_disp_pin(argv[1], &pin_no) ||
+            !display_pin_map(pin_no, &port, &pin))
         {
-            GPIO_InitStruct(&s);
+            cli_printf("bad pin: %s (use pin1..pin7 or all)\r\n", argv[1]);
-            s.Pin       = pin;
+            return;
-            s.GPIO_Mode = GPIO_MODE_OUTPUT_PP;
-            GPIO_InitPeripheral(port, &s);
-            GPIO_SetBits(port, pin);
-            cli_printf("pin%u (%s) = 1\r\n", (unsigned)pin_no, name);
         }
-        else if (argv[2][0] == '0' && argv[2][1] == '\0')
+        cli_pin_str(port, pin, name);
+
+        if (argc >= 3)
         {
-            GPIO_InitStruct(&s);
+            if (display_auto_get())
-            s.Pin       = pin;
+            {
-            s.GPIO_Mode = GPIO_MODE_OUTPUT_PP;
+                cli_write("warning: auto display is ON - use 'dispauto off' first\r\n");
-            GPIO_InitPeripheral(port, &s);
+            }
-            GPIO_ResetBits(port, pin);
+            if (argv[2][1] == '\0' && cli_disp_set_pin(pin_no, argv[2][0]) == 1)
-            cli_printf("pin%u (%s) = 0\r\n", (unsigned)pin_no, name);
+            {
-        }
+                if (argv[2][0] == 'z' || argv[2][0] == 'Z')
-        else if (argv[2][0] == 'z' || argv[2][0] == 'Z')
+                {
-        {
+                    cli_printf("pin%u (%s) = high-Z\r\n", (unsigned)pin_no, name);
-            /* high-impedance (release the pin) */
+                }
-            GPIO_InitStruct(&s);
+                else
-            s.Pin       = pin;
+                {
-            s.GPIO_Mode = GPIO_MODE_INPUT;
+                    cli_printf("pin%u (%s) = %c\r\n", (unsigned)pin_no, name, argv[2][0]);
-            s.GPIO_Pull = GPIO_NO_PULL;
+                }
-            GPIO_InitPeripheral(port, &s);
+            }
-            cli_printf("pin%u (%s) = high-Z\r\n", (unsigned)pin_no, name);
+            else
+            {
+                cli_write("usage: dispset <pin1-7> [0|1|z]\r\n");
+            }
         }
         else
         {
-            cli_write("usage: dispset <pin1-7> [0|1]   (0=low, 1=high, z=hi-Z)\r\n");
+            cli_printf("pin%u (%s) = %u\r\n", (unsigned)pin_no, name,
+                       (unsigned)(GPIO_ReadInputDataBit(port, pin) ? 1u : 0u));
         }
     }
-    else
-    {
-        cli_printf("pin%u (%s) = %u\r\n", (unsigned)pin_no, name,
-                   (unsigned)(GPIO_ReadInputDataBit(port, pin) ? 1u : 0u));
-    }
 }
 
 /* Command table; add new commands here */
@@ -792,7 +845,7 @@ static const CliCmd_t s_cmds[] = {
     {"pinset",   "pinset <pxN> [0|1]: set/read GPIO level (pa0-6/pb0-13)", CmdPinSet},
     {"disp",     "disp <value> [f] [hex]: set 7-seg display value",    CmdDisp},
     {"dispauto", "dispauto [on|off]: enable/disable auto display scan", CmdDispAuto},
-    {"dispset",  "dispset <pin1-7> [0|1]: drive display pin (pin1=PB0..pin7=PA6)", CmdDispSet},
+    {"dispset",  "dispset <pin1-7|all> [0|1|z]: drive display pin(s)", CmdDispSet},
     {"factory",  "factory: restore params to defaults and reboot",     CmdFactory},
     {"uartrst",  "uartrst: re-init USART1 (460800 8N1), flush rx queue", CmdUartRst},
     {"uartinfo", "uartinfo: show USART1 pins/baud/format",             CmdUartInfo},

tools/out/mothercup_ble_prod_ota.json

@@ -1,7 +1,7 @@
 {
   "file": "mothercup_ble_prod_ota.bin",
   "target_bank": 1,
-  "size": 59184,
+  "size": 59392,
-  "crc32": "0xCE4E676C",
+  "crc32": "0x59E51401",
-  "version": 65569
+  "version": 65570
 }

tools/out/mothercup_ble_prod_ota_app2.json

@@ -1,7 +1,7 @@
 {
   "file": "mothercup_ble_prod_ota_app2.bin",
   "target_bank": 2,
-  "size": 59484,
+  "size": 59692,
-  "crc32": "0x3A51266C",
+  "crc32": "0xB370E0B5",
-  "version": 65569
+  "version": 65570
 }