apptest 改为温度量程扫测 0.1-999.0 (摄氏+华氏) (APP V1.00.40)

- apptest: 0.1~9.9(0.1) -> 10~99(1) -> 100~990(10) -> 999.0, 先C后F各扫一遍
- 保留 display_set_raw 供后续状态显示(Err/Lo/Hi)用
- 显示不做F/C换算, 华氏/摄氏只影响DIG4字母与DIG6-A
- 仅 APP 改动, Boot 不动 (仍 V1.00.07)
- docs/开发日志.md: 新增 §68

docs/开发日志.md

@@ -1639,3 +1639,20 @@ APP2 链接的镜像发向 APP1 区。设备端 END 校验（向量表 Reset PC
     500ms；结束后恢复 auto 状态并回 0.0；命令表注册 `apptest`。
 - 版本：APP `V1.00.38` → `V1.00.39`（`APP_FW_VERSION_NUM` 0x00010026 →
   0x00010027）。Boot 不动（仍 V1.00.07）。
+
+## 68. `apptest` 改为温度量程扫测（0.1~999.0，摄氏+华氏）（2026-09-06，APP V1.00.40，仅 APP）
+
+- 用户澄清：`apptest` 不是"全字符"，而是要**把 0.1~999.0 整个温度量程在
+  摄氏、华氏各扫一遍**，覆盖所有数字位（百/十/个/小数）与 F/C 单位字母、
+  DIG6-A 指示。
+- 修改（`cli_core.c` `CmdAppTest`）：
+  - 删掉上一版的 0-9/A-F 裸码循环（`display_set_raw` 保留，供后续状态
+    显示如 Err/Lo/Hi 用，不再被 apptest 调用）；
+  - 改为两轮扫测（先摄氏后华氏）：`0.1~9.9`（步 0.1）→ `10~99`（步 1）→
+    `100~990`（步 10）→ `999.0`，每值 100ms、末值 300ms；全程强制自动扫描，
+    结束恢复 auto 状态并回 0.0；
+  - 命令 help 更新为 `apptest: sweep display 0.1-999.0 in C and F`。
+  - 注：显示驱动**不做 F/C 数值换算**，华氏/摄氏只影响 DIG4 字母与 DIG6-A，
+    数值原样显示。
+- 版本：APP `V1.00.39` → `V1.00.40`（`APP_FW_VERSION_NUM` 0x00010027 →
+  0x00010028）。Boot 不动（仍 V1.00.07）。

mcm-ddc-ble/inc/app_version.h

@@ -9,12 +9,12 @@
 #define __APP_VERSION_H__
 
 #ifndef APP_FW_VERSION
-#define APP_FW_VERSION      "V1.00.39"
+#define APP_FW_VERSION      "V1.00.40"
 #endif
 
 /* Numeric form used by the BLE info query / OTA records: 0x00MMmmpp */
 #ifndef APP_FW_VERSION_NUM
-#define APP_FW_VERSION_NUM  0x00010027u
+#define APP_FW_VERSION_NUM  0x00010028u
 #endif
 
 #endif /* __APP_VERSION_H__ */

mcm-ddc-ble/src/cli_core.c

@@ -848,41 +848,46 @@ static void CmdDispTest(int argc, char* argv[])
 }
 
 /**
- * @brief  "apptest": render every displayable character (0-9, A-F) in all
+ * @brief  "apptest": sweep the temperature display over 0.1..999.0 in both
- *         four numeric positions so the full segment set can be verified
+ *         Celsius and Fahrenheit so every digit position (hundreds/tens/ones/
- *         visually. DIG4 stays "C". Restores auto-scan + 0.0 when done.
+ *         tenths), the F/C unit letter and the DIG6-A indicator are exercised.
+ *         Restores auto-scan + 0.0 when done.
  */
 static void CmdAppTest(int argc, char* argv[])
 {
     uint8_t  prev_auto = display_auto_get();
-    uint8_t  digits[5];   /* DIG1..DIG5 raw codes */
+    uint16_t i;
-    uint8_t  c;
+    uint8_t  unit;
 
     (void)argc;
     (void)argv;
 
     display_auto_set(1u);
 
-    cli_write("apptest: 0-9, A-F (each repeated in every numeric position)\r\n");
+    for (unit = 0u; unit < 2u; unit++)
-
-    for (c = 0u; c < 16u; c++)
     {
-        digits[0] = c;   /* DIG1 = hundreds */
+        uint8_t type = (unit == 0u) ? DISP_TYPE_CELSIUS : DISP_TYPE_FAHRENHEIT;
-        digits[1] = c;   /* DIG2 = tens */
-        digits[2] = c;   /* DIG3 = ones */
-        digits[3] = 0x0Cu;   /* DIG4 = "C" (unit letter, keep fixed) */
-        digits[4] = c;   /* DIG5 = tenths */
-        display_set_raw(digits, DISP_TYPE_CELSIUS);
 
-        if (c < 10u)
+        cli_printf("apptest sweep %s: 0.1..9.9 -> 10..99 -> 100..999\r\n",
+                   (unit == 0u) ? "C" : "F");
+
+        for (i = 1u; i <= 99u; i++)                 /* 0.1 .. 9.9 step 0.1 */
         {
-            cli_printf("  %u\r\n", (unsigned)c);
+            display_set((float)i * 0.1f, type, DISP_BASE_DECIMAL);
+            vTaskDelay(pdMS_TO_TICKS(100));
         }
-        else
+        for (i = 10u; i <= 99u; i++)                /* 10 .. 99 step 1 */
         {
-            cli_printf("  %c\r\n", (char)('A' + (c - 10u)));
+            display_set((float)i, type, DISP_BASE_DECIMAL);
+            vTaskDelay(pdMS_TO_TICKS(100));
         }
-        vTaskDelay(pdMS_TO_TICKS(500));
+        for (i = 100u; i <= 990u; i += 10u)         /* 100 .. 990 step 10 */
+        {
+            display_set((float)i, type, DISP_BASE_DECIMAL);
+            vTaskDelay(pdMS_TO_TICKS(100));
+        }
+        display_set(999.0f, type, DISP_BASE_DECIMAL);   /* 999.0 */
+        vTaskDelay(pdMS_TO_TICKS(300));
     }
 
     display_set(0.0f, DISP_TYPE_CELSIUS, DISP_BASE_DECIMAL);
@@ -910,7 +915,7 @@ static const CliCmd_t s_cmds[] = {
     {"dispauto", "dispauto [on|off]: enable/disable auto display scan", CmdDispAuto},
     {"dispset",  "dispset <pin1-7|all> [0|1|z]: drive display pin(s)", CmdDispSet},
     {"disptest", "disptest: run display self-test (digits/multi/max/degF)", CmdDispTest},
-    {"apptest",  "apptest: show every displayable char (0-9, A-F)",     CmdAppTest},
+    {"apptest",  "apptest: sweep display 0.1-999.0 in C and F",        CmdAppTest},
     {"factory",  "factory: restore params to defaults and reboot",     CmdFactory},
     {"uartrst",  "uartrst: re-init USART1 (460800 8N1), flush rx queue", CmdUartRst},
     {"uartinfo", "uartinfo: show USART1 pins/baud/format",             CmdUartInfo},

tools/out/mothercup_ble_prod_ota.json

@@ -1,7 +1,7 @@
 {
   "file": "mothercup_ble_prod_ota.bin",
   "target_bank": 1,
-  "size": 60032,
+  "size": 60052,
-  "crc32": "0x5393B90B",
+  "crc32": "0xCB612B01",
-  "version": 65575
+  "version": 65576
 }

tools/out/mothercup_ble_prod_ota_app2.json

@@ -1,7 +1,7 @@
 {
   "file": "mothercup_ble_prod_ota_app2.bin",
   "target_bank": 2,
-  "size": 60332,
+  "size": 60352,
-  "crc32": "0x4CDEA62B",
+  "crc32": "0x01AB370F",
-  "version": 65575
+  "version": 65576
 }